Denon AVR-4306 - Manual (Page 55)

50
Basic Operation Basic Operation
2 Press the CURSOR D D or H H button to select the
host name of the computer (music server) on
which the music file you want to play is located,
then press the
ENTER or CURSOR G G button.
3 Press the CURSOR D D or H H button to select the
search item or the desired folder, then press the
ENTER or CURSOR G G button.
4 Press the CURSOR D D or H H button to select the
music file, then press the ENTER or CURSOR G G
button.
• Connection starts, and playback starts once the buffer
reaches “100%”.
Press the CURSOR H H button to select the next file, the
CURSOR D D button to select the previous file.
During playback, press the ENTER button once to pause
playback, then press the ENTER button again to resume
playback.
If the ENTER button is pressed and held in for more than 2
seconds when in the play or pause mode, playback stops
and the previous menu screen reappears.
Playable music files are indicated by the “
∗
” mark in front
of them.
The same operations as for Internet radio stations can be used to
preset music files or register them in your favorites and play
them.
NOTE:
• Registered presettings are deleted when they are
overwritten.
• When the operations describe below are performed, the
music server database is updated and it may no longer be
possible to play the music files that have been preset or
registered in your favorites:
• When the music server is stopped and restarted.
• When music files are deleted from or added to the music
server.
• When using an ESCIENT server, place “ESCIENT” before
the server name.
2 Playing music files that have been preset or
registered in your favorites
Operating the AVR-4306 using a browser
Internet Explorer can be used on the computer connected to the
AVR-4306 over the network to operate the AVR-4306.
Check the AVR-4306’s IP address (
page 80) beforehand and
input this IP address in Internet Explorer to display the AVR-
4306’s control panel.
Operate in the same way as with normal Internet browsing to
control the AVR-4306.
Playing the USB (mass storage) device
Music files (WMA, MP3 and WAV) stored on a USB device can
be played by connecting the USB device to the AVR-4306.
USB device
USB
NOTE:
• DENON will accept no responsibility whatsoever for loss or
damage of data occurring on a USB device when the USB
device is used connected to the AVR-4306.
• USB devices does not operate when connected via a USB
hub.
• Please note that operation of and power supply to all USB
devices is not guaranteed.
• It is not possible to connect the AVR-4306 to a computer
using a USB cable.
• The AVR-4306 is not compatible with iPod shuffle.
An operation method is the same as “Playing music
files stored on the computer (music server)”.
REPEAT MODE:
When the MODE button is pressed while playing a USB
device, the repeat mode switches as shown below.
RANDOM MODE:
When the MEMORY button is pressed, the random mode
switches as shown below.
When the SEARCH button is pressed while a USB device or
folder is selected, playback of all the files on the USB device
or in the folder begins.
ON OFF
ONE ALL OFF
• AVR-4306 corresponds to playing the USB device of mass
storage class.
• Compatible with USB devices in FAT16 or FAT32 format.
• If the USB device is divided into multiple partitions, only the
files on the drive with the lowest drive number on that partition
are selected.
• The AVR-4306 is compatible with the “MPEG-1 Audio Layer 3”
standards (sampling frequency of 32, 44.1 or 48 kHz). It is not
compatible with such other standards as “MPEG-2 Audio Layer
3”, “MPEG-2.5 Audio Layer 3”, MP1, MP2, etc. WMA
(Windows Media) files recorded with a sampling frequency (fs)
of 32, 44.1, and 48 kHz are supported.
• Applicable bit rates: 32 to 320 kbps for MP3 files, 48 to 192
kbps for WMA (Windows Media) files.
• With the AVR-4306 it is possible to display folder names and file
names on the screen like titles. The AVR-4306 can display up to
95 characters, consisting of numbers, capital letters and small
letters. A “?” mark is displayed in place of non-compatible
characters.
• With the AVR-4306, only music files that are not copyright
protected* can be played.
*: Contents downloaded from pay distribution sites on the
Internet are copyright protected. Also, when CDs or other
media are ripped on a computer and encoded in WMA
format, they may be copyright protected, depending on the
computer’s settings.
• When the STATUS button is pressed during playback, the front
panel display switches between the title name, artist name and
album name.
• The MP3 ID3-Tag (Ver. 2) function is compatible with title and
artist names.
• The WMA meta tag function is compatible with title, artist and
album names.
• The audio signals are not output from the digital output
terminal.