Denon AVR-4306 User Manual
Page 50
45
Basic Operation
Basic Operation
Listening to music
1
Press the
CURSOR D
D
or
H
H
button to select the
music file you want to play, then press the
ENTER
or
CURSOR G
G
button.
• Press the CURSOR F
F button to return to the music menu
screen.
2
Press the
ENTER
or
CURSOR G
G
button.
• Playback starts.
Manual search:
Press and hold in the CURSOR D
D or H
H button during playback.
•
D
D : Fast reverse
•
H
H : Fast forward
Track search:
Press the CURSOR D
D or H
H button during playback.
•
D
D : Move to beginning of previous track
•
H
H : Move to beginning of next track
Repeat play:
Press the TU (TUNER) button, then press the MODE button.
The mode switches as follows each time the MODE button is
pressed.
• RPT One: Single track repeat
• RPT ALL: All track repeat
Shuffle play:
Press the TU (TUNER) button, then press the MEMORY button.
The mode switches as follows each time the MEMORY button
is pressed.
• SFL Songs : Single track shuffle
• SFL Albums: Album shuffle
Pause:
Press the ENTER button during playback.
Press again to resume.
Stop:
Press the ENTER button for at least 2 seconds during playback.
The mode switches between the Browse mode and the
Remote mode if the MODE button is pressed for at least 2
seconds after pressing the TU (TUNER) button.
In the Remote mode, only the CURSOR buttons and the
ENTER button can be used.
• When the STATUS button is pressed during playback, the front
panel display switches between the title name, artist name and
album name.
• The iPod’s backlight turns on when the CURSOR F
F button is
pressed for more than two seconds while in the Remote mode.
When the backlight is on, it can be turned off by pressing the
CURSOR F
F button for more than two seconds.
• Depending on the iPod’s software version, it may not be
possible to operate the iPod from the AVR-4306. Use the latest
version of the software. Information on the latest version of the
software can be obtained on the Apple Computer website.
• If you do not want the OSD to be displayed while playing the
iPod, set “Function/Mode Status” at “Setting the On Screen
Display” to “OFF” (
page 73).
• With the AVR-4306 it is possible to display folder names and file
names on the screen like titles. The AVR-4306 can display up to
64 characters, consisting of numbers, capital letters and small
letters. A “?” mark is displayed in place of non-compatible
characters.
Viewing still pictures (only for iPods equipped
with the slideshow function)
1
Press the
TU
(TUNER) button, then press the
MODE
button for at least 2 seconds to switch
from the Browse mode to the Remote mode.
• “Remote iPod” is displayed on the AVR-4306’s display.
2
Watching the iPod’s screen, press the
CURSOR D
D
or
H
H
button to select “Photos”, then press the
ENTER
or
CURSOR G
G
button.
• The iPod’s photo data is displayed on the TV monitor.
Use this procedure to view photo data stored on the iPod on a TV
monitor.
Disconnecting the iPod
We recommend either pressing the
ON/STANDBY
button to set the AVR-4306’s power to the standby
mode, or turning the
FUNCTION
knob on the AVR-
4306 or pressing the
FUNCTION
button on the
remote control unit to set the input source to
something other than “AUX/iPod”.
CURSOR
ON/STANDBY
FUNCTION
ENTER
MODE
TU
ENTER
CURSOR
MEMORY
FUNCTION