Specifications – Denon AVR-4306 User Manual
Page 111
Troubleshooting
Specifications
106
Page
Measures
Cause
Symptom
21
42
42, 43
42
“NO SIGNAL” is
displayed in the XM
mode.
• The signal cannot be received.
• Reposition your XM Connect-and-
Play antenna.
“CHECK ANTENNA” is
displayed in the XM
mode.
• AVR-4306’s XM terminal and the
XM Connect-and-Play antenna is
not properly connected.
• Check that the connection are
correct.
“OFF AIR” is displayed
in the XM mode.
• The selected channel is not
currently broadcasting.
• Select the another channel.
Receiving only XM
channels 0 and 1.
• The XM Tuner is not activated.
• Contact XM Radio.
Specifications
2
Audio section
• Power amplifier
Rated output:
Front:
130 W + 130 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
130 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Surround (A, B):
130 W + 130 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
130 W + 130 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power:
150 W x 2 ch (8
Ω
/ohms)
220 W x 2 ch (4
Ω
/ohms)
Output terminals:
Front, Center, Surr. Back
6 ~ 16
Ω
/ohms
Surround:
A or B
6 ~ 16
Ω
/ohms
A + B
8 ~ 16
Ω
/ohms
• Analog
Input sensitivity / input impedance:
200 mV / 47 k
Ω
/kohms
Frequency response:
10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N:
102 dB (DIRECT mode)
Distortion:
0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output:
1.2 V
• Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input:
Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting, with 5 mV input)
Rated output / Maximum output:
150 mV / 8 V
Distortion factor:
0.03% (1 kHz, 3 V)
2
Video section
• Standard video terminals
Input / output level and impedance:
1 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• S-Video terminals
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
C (color) signal — 0.286 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• Color component video terminal
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
P
B
/C
B
signal — 0.7 Vp-p, 75
Ω
/ohms
P
R
/C
R
signal — 0.7Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 100 MHz — +0, –3 dB
2
Tuner section
[FM]
[AM]
(note: µV at 75
Ω
/ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range:
87.5 MHz ~ 107.9 MHz
520 kHz ~ 1710 kHz
Usable Sensitivity:
1.0 µV (11.2 dBf)
18 µV
50 dB Quieting Sensitivity:
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
S/N (IHF-A):
MONO
77 dB
STEREO
72 dB
Total Harmonic Distortion (at 1 kHz):
MONO
0.15%
STEREO
0.3%
2
General
Power supply:
AC 120 V, 60 Hz
Power consumption:
8.0 A
1 W Max (Standby)
Maximum external dimensions:
434 (W) x 171 (H) x 429 (D) mm (17-3/32” x 6-47/64” x 16-57/64”)
Mass:
18.5 kg (40 lbs 12.6 oz)
2
Remote control unit (RC-1024)
Batteries:
LR6/AA Type (two batteries)
External dimensions:
63 (W) x 238 (H) x 31 (D) mm (2-31/64” x 9-3/8” x 1-7/32”)
Mass:
190 g (Approx. 6.7 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.