Denon AVR-4306 - Manual (Page 75)

70
Advanced Setup – Part 1 Advanced Setup – Part 1
2 Preset Skip
When selecting preset channels pressing the CHANNEL + or –
button, it is possible to skip specific preset channels.
1 Press the CURSOR D D or H H button to select
“Preset Skip” at the “Tuner Presets” screen, then
press the
ENTER button.
• The “Preset Skip ”screen appears.
3 When the CURSOR H H button is pressed at the
very bottom of the screen.
• The screen for the next preset memory block appears.
2 Press the CURSOR D D or H H button to select the
preset channel you want to skip, then press the
CURSOR F F or G G button to select “ON” or
“OFF”.
It is also possible to select the desired preset memory block
by selecting “Block” then pressing the CURSOR F
F or G G
button.
2 Preset Name
It is possible to input station names , etc., for preset channels
(except the XM channel). These names are displayed on the
front display and on the on screen display.
1 Press the CURSOR D D or H H button to select
“Preset Name” at the “Tuner Presets” screen,
then press the
ENTER button.
• The “Preset Name” screen appears.
Up to 8 characters can be input.
5
Press the ENTER button.
• The “Tuner Presets” screen reappears.
2 Press the CURSOR D D or H H button to select the
preset channel whose name you want to change,
then press the
CURSOR F F or G G button.
• The screen switches to the character input screen.
Example: When “A1” is selected and the CURSOR F F or G G
button is pressed
3 Press the CURSOR F F or G G button to move the
cursor ( 2 2 ) to the character, number, symbol or
punctuation mark you wish to input, and press
the
CURSOR D D or H H button to select that
character.
4 Repeat steps 2 and 3.
A B C D E F G H I J K L M N O P Q R S T U V W X Y
Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2
3 4 5 6 7 8 9
! ” # % & ’ ( ) * + , – . / : ; < = > ? @ [ \ ] (space)
4 Repeat step 3 to input the preset channel name.
To reset the preset channel name to the default value, press
the CURSOR F
F or G G button to highlight the preset channel
display, then press the CURSOR H H button.
When “Yes” is selected for “Default”, the setting are
automatically reset to the default name.
5 Once all the characters have been input,
press the ENTER
button.
• The “Preset Name” screen reappears.
Use the same procedure to change other input source
names as well.
It is also possible to select the desired preset memory block
by selecting “Block” then pressing the CURSOR F
F or G G
button.
6 When the CURSOR H H button is pressed at the
very bottom of the screen.
• The screen for the next preset memory block appears.
7
Press the ENTER button.
• The “Tuner Presets” screen reappears.
8
Press the ENTER button to enter the setting.
• The “Audio Input Setup” menu reappears.
• Direct tuning is not possible when “Preset Skip” is set to
“OFF”.