Denon AVR-4306 - Manual (Page 64)

59
Advanced Operation Advanced Operation
Resetting
1 Press and hole the SET UP button for at least
three seconds.
• The IR segment blinks twice.
2 Press the 9, 7, 8 button (9
→ →77→ →88))
to select a
setting.
• The IR segment blinks twice.
1 Press and hold the SETUP button for at least
three seconds.
• The IR segment blinks twice.
2
Press the 9, 7, 6 button (9
→ →
7
→ →
6).
• The IR segment blinks twice.
3 Press the MODE SELECTOR button.
4 Press the learned button you want to reset twice.
• The IR segment blinks twice.
Other key can be deleted by repeating steps 1 to 4.
2 Resetting the single learned button
1 Press and hole the SET UP button for at least
three seconds.
• The IR segment blinks twice.
2 Press the 9, 7, 8 button (9
→ →77→ →88))
to select a
setting.
• The IR segment blinks twice.
1 Press and hold the SETUP button for at least
three seconds.
• The IR segment blinks twice.
4 Press and hold the SETUP button for at least
three seconds to clear the system call.
• The IR segment blinks twice.
2
Press the 9, 7, 8 button (9
→ →
7
→ →
8).
• The IR segment blinks twice.
3 Press the SYSTEM CALL button (1 to 3) you want
to reset.
2 Resetting the system call buttons
1 Press and hole the SET UP button for at least
three seconds.
• The IR segment blinks twice.
2 Press and hold the SETUP button for at least
three seconds.
• The IR segment blinks twice.
1 Press the MODE SELECTOR button (TV or SAT /
CBL) you want to reset.
4 Press and hold the SETUP button for at least
three seconds to reset the punch through setting.
• The IR segment blinks twice.
2 Resetting the punch through setting
1 Press and hole the SET UP button for at least
three seconds.
• The IR segment blinks twice.
2 Press the 9, 7, 8 button (9
→ →77→ →88))
to select a
setting.
• The IR segment blinks twice.
1 Press and hold the SETUP button for at least
three seconds.
• The IR segment blinks twice.
2 All reset function
1 Press and hole the SET UP button for at least
three seconds.
• The IR segment blinks twice.
2 Press the 9, 7, 8 button (9
→ →77→ →88))
to select a
setting.
• The IR segment blinks twice.
1 Press and hold the SETUP button for at least
three seconds.
• The IR segment blinks twice.
2
Press the 9, 7, 6 button (9
→ →
7
→ →
6).
• The IR segment blinks twice.
3 Press the MODE SELECTOR button you want to
reset twice.
• The IR segment blinks twice.
2 Resetting all learned buttons
2 Press the 9, 8, 1 button (9
→ →
8
→ →
1).
• The IR segment blinks four times.
• Clear the entire system memory, which will restore the
remote control unit to the factory default settings.
Only use this if you wish to clear all customized settings and
memories and restore the unit to its out-of-the-box factory
default settings.
SYSTEM CALL
NUMBER
SETUP
MODE SELECTOR
IR segment
3 Press the 9, 8, 4 button (9
→ →
8
→ →
4) to select a
setting.
• The IR segment blinks twice.