Denon AVR-4306 - Manual (Page 68)

Advanced Operation Advanced Operation
63
1 Select the input source to which DENON LINK
was assigned at the “Digital In Assign” (
page
67) in the system setup.
Playing Super Audio CDs with DENON LINK
3 Start playback on the selected component.
• The DSD indicator lights.
For operating instructions, refer to the component’s manual.
“DSD DIRECT” is shown on the display when playing DSD
2-channel signals in the DIRECT mode. “DSD MULTI
DIRECT” is displayed when playing DSD multi-channel
signals in the DIRECT mode (SB CH OUT “OFF”).
Other function
• The DENON LINK indicator lights.
lights
(Main unit) (Remote control unit)
Example: DVD
2 Select the surround mode.
(Main unit) (Remote control unit)
Example: DIRECT
lights
ZONE2/3/REC SELECT
NIGHT DIRECT/STEREO
FUNCTION
SURROUND MODE
ROOM EQ
POWER
When playing DSD signals in the DIRECT or PURE DIRECT
mode, the DSD signals are converted into analog signals.
When playing in other surround modes, the DSD signals are
first converted into PCM signals. The input signal and playing
status can be checked by pressing the ON SCREEN button on
the remote control unit.
Example:
When DSD multi-channel signals are played in the DIRECT
mode
Example:
When DSD multi-channel signals are played in the 7CH
STEREO mode
ROOM EQ
ON SCREEN
DIRECT/STEREO
SURROUND MODE
DVD