Rena T-950 - Manual (Page 76)

APPENDIX
70
Feeder Interface Cables & Risers
Standard Feeder Interface Cables:
Application Feeder Interface Cable Riser Stand
EasyFeed 120 Feeder
T-950 Tabber *33E-500-192 rev A
(Included with Tabber)
RS-400
EasyFeed 120 Feeder
XPS-ProTab 4.0 *33E-500-192 rev A
(Included with Tabber)
XPS-ProStand
XPS-ProFeed Shuttle Feeder
XPS-ProTab 4.0 *33E-500-192 rev A
(Included with Tabber)
None Required
* “33E-500-192” can only be used with the EasyFeed 120, 33E-500-192 rev A”, can be
used with the EasyFeed 120 or XPS-ProFeed Shuttle.
Feeder Interface Cables for System Configurations:
The following feeder interface cables and riser stands can be purchased for system
configurations:
System
1
Feeder Interface Cable Riser Stand
EasyFeed 120 Feeder
T-950 Tabber
Envelope Imager XT3.0/XT4.0
33E-500-194 RS-400
EasyFeed 120 Feeder
XPS-ProTab 4.0
Envelope Imager XT3.0/XT4.0
35E-500-194 XPS-ProStand
EasyFeed 120 Feeder
XPS-ProTab 4.0
XPS-ProMail 3.0/4.0
25E-500-201 or
25E-500-205 & 25E-500-210
XPS-ProStand
XPS-ProFeed Shuttle Feeder
XPS-ProTab 4.0
XPS-ProMail 3.0/4.0 Printer
25E-500-201 or
25E-500-205 & 25E-500-210
None Required
1
Cable connects Tabber and Printer to Feeder, so each can control the Start/Stop function of the feeder.
XPS-ProMail System Configuration
XPS-ProFeed Shuttle, XPS-ProTab 4.0, XPS-ProMail 4.0, XPS-ProDry 8.0 and TB659 Conveyor.