Rena T-950 - Manual (Page 28)

SETUP & OPERATION
22
Loading Fan-Folded Labels more than 2” Long.
CAUTION
WHEN RUNNING LABELS OVER TWO INCH LONG THE SPEED OF THE
TABBER MUST BE SET TO 10,000 PER HOUR OR LESS.
The Fan Folded Label tray has to be installed in order to run fan-folded labels on the TABBER.
The steps required are below:
1. Remove any labels or tabs that may be installed
on the machine.
2. Remove the 2” Tab/Label applicator head and
replace it with the 4” Label applicator head.
3. Remove the Roll Guide [1] and the Roll Core
Support [2] from the machine. The roll core
support is held in place by an Allen screw.
4. Install the Label Tray over the spindle as
shown.
5. Use the two thumbscrews [3] to attach the
tray assembly to the Tab Reel holder.