Rena T-950 - Manual (Page 33)

SETUP & OPERATION
27
3
4
5
2
1
4. Loosen the Head Assembly
Locking Screw [1] and slide the
head to approximate location that
you want your tab/stamp/label
applied to the mail piece.
Once you obtain the approximate
location, the Head Fine
Adjustment Knob [2] can be used
to precisely adjust the
tab/stamp/label position.
If you are tabbing; position the
Head Assembly so that the tab is
bisecting the edge of the mail
piece you are tabbing.
If you are applying stamps or labels; position the Head Assembly so the stamp or label is
properly positioned over the mail piece.
5. Loosen the Sensor Positioning Knob [3] and
position the Pointer [4] over the center of the
tab/stamp as shown.
When tabbing; check that the center of the Tab
is aligned with the Tab Folding Guide [5].
Note: The Head Fine Adjustment Knob [2] can
be used to precisely adjust the tab/stamp/label
position.