MovinCool Climate Pro 18 Service Manual - Manual (Page 54)

Operation Section
54
7.3 Record Display
• The record of unit power on time, compressor operating time, defrosting time and self-diagnostic
codes can be displayed on the LCD while the unit is running.
• The unit power on time, compressor operating time, and defrosting time can be stored up to
65500 hours (automatically cleared to 0 hour and start counting).
• The self-diagnostic codes can be stored up to 3 different codes.
(1) Display method
• Press and hold MENU/ESC and ENTER
buttons for 5 seconds.
• Use FAN+ or -FAN button to select
"RECORD", and press ENTER button to
confirm. The record content is displayed.
< NOTE >
• If no button is pressed for 1 minute, the LCD automatically displays the previous mode.
• Press Menu/ESC button again to return to the previous screen.
ILL00876-00
ILL00877-00