MovinCool Climate Pro 18 Service Manual - Manual (Page 27)

Operation Section
27
4.2 Compressor
• The compressor used for the unit is hermetically sealed. The compressor and the compressor
motor are in one casing.
(1) Compressor construction
•The construction of a rotary type compressor is divided into two mechanisms; the drive
mechanism (compressor motor), and the compression mechanism (compressor). When the
rotor shaft of the motor (drive mechanism) turns, the roller (compression mechanism) rotates to
compress the refrigerant.
ILL00861-00
Discharge Gas (High Pressure)
Accumulator
Strainer
Suction Gas (Low Pressure)
Blade
Discharge Valve
Oil Lubricator
Roller
Cylinder
Rotor
Stator
Terminal