Measurement Computing CB-COM-7012 - Manual (Page 63)

63
CB-7012, CB-7014, CB-7017 User’s Manual
2.40 ~AA3EVV
Description: Set Host Watchdog Timeout Interval
Syntax: ~AA3EVV[CHK](cr)
~ Delimiter character
AA Address of module to set (00 to FF)
3 Command for setting host watchdog timeout interval
E 1=Enable/0=Disable host watchdog
VV timeout interval, from 01 to FF, each for 0.1 second
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax or communication error may get no response.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of responding module (00 to FF)
Example:
Command: ~013164 Receive: !01
Set Address 01 enable host watchdog and timeout interval is
64(10.0 second); returns successful.
Command: ~012 Receive: !0164
Read Address 01 host watchdog timeout interval, return 64,
the timeout interval is 10.0 seconds.
Related Command:
Sec.2.36, ~**; Sec.2.39, ~AA2
Related Topic:
Set.3.2, Module Status; Sec.3.3, Dual Watchdog Operation