Measurement Computing CB-COM-7012 - Manual (Page 35)

35
CB-7012, CB-7014, CB-7017 User’s Manual
2.12 $AA8V
Description: Set LED Configuration
Note: The command is for CB-7012D/12FD/14D only.
Syntax: $AA8V[CHK](cr)
$ Delimiter character
AA Address of module to set (00 to FF)
8 Command for setting LED configuration
V 1=Set LED to module, 2=Set LED to host
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax or communication error may get no response.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of responding module (00 to FF)
Example:
Command: $0182 Receive: !01
Set Address 01 LED to host control, return successful.
Command: $0281 Receive: !02
Set Address 02 LED to module control, return successful.
Related Command:
Sec. 2.11, $AA8; Sec. 2.13, $AA9(Data)