34 $aaa – Measurement Computing CB-COM-7012 User Manual
Page 57

57
CB-7012, CB-7014, CB-7017 User’s Manual
2.34 $AAA
Description: Set Linear Mapping Status
Note: The command is for CB-7014D only.
Syntax: $AAA[CHK](cr)
$
Delimiter character
AA
Address of module to read (00 to FF)
A
Command for reading linear mapping status
Response: Valid Command:
!AAV[CHK](cr)
Invalid Command:
?AA[CHK](cr)
Syntax or communication error may get no response.
!
Delimiter for valid command
?
Delimiter for invalid command
AA
Address of responding module (00 to FF)
V
0 = disable linear mapping, 1 = enable linear mapping
Example:
Command: $01A
Receive: !011
Read Address 01 linear mapping status; return enable.
Related Command:
Sec. 2.32, $AA6(SL)(SH); Sec. 2.33, $AA7(TL)(TH)
Related Topic:
Sec. 3.8, Linear Mapping
This manual is related to the following products: