35 $aaav – Measurement Computing CB-COM-7012 User Manual
Page 58

58
CB-7012, CB-7014, CB-7017 User’s Manual
2.35 $AAAV
Description: Enable/Disable Linear Mapping
Note: This command is for CB-7014D only.
Syntax: $AAAV[CHK](cr)
$
Delimiter character
AA
Address of module to enable/disable (00 to FF)
A
Command for enable/disable linear mapping
V
0=disable linear mapping, 1=enable linear mapping
Response: Valid Command:
!AA[CHK](cr)
Invalid Command:
?AA[CHK](cr)
Syntax or communication error may get no response.
!
Delimiter for valid command
?
Delimiter for invalid command
AA
Address of responding module (00 to FF)
Example:
Command: $01A0
Receive: !01
Disable Address 01 linear mapping, return successful.
Related Command:
Sec.2.32, $AA6(SL)(SH); Sec.2.33, $AA7(TL)(TH)
Related Topic:
Sec.3.8, Linear Mapping
This manual is related to the following products: