Measurement Computing CB-COM-7012 - Manual (Page 32)

32
CB-7012, CB-7014, CB-7017 User’s Manual
2.9 $AA5VV
Description: Set Channel Enable
Note: This command is for CB-7017/17F only.
Syntax: $AA5VV[CHK](cr)
$ Delimiter character
AA Address of module to set (00 to FF)
5 Command to set channel enable
VV channel enable/disable, 00 is all disabled and FF is all
enabled.
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax or communication error may get no response.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of responding module (00 to FF)
Example:
Command: $0155A Receive: !01
Set Address 01 to enable channel 1,3,4,6 and disable channel
0,2,5,7. Return successful.
Command: $016 Receive: !015A
Read Address 01 channel status. Return channel 1,3,4,6 are
enabled and channel 0,2,5,7 are disabled.
Related Command:
Sec. 2.10 $AA6