Measurement Computing CB-COM-7012 - Manual (Page 54)

54
CB-7012, CB-7014, CB-7017 User’s Manual
2.31 $AA5
Description: Read Target Low/High Values for Linear Mapping
Note: This command is for CB-7014D only.
Syntax: $AA5[CHK](cr)
$ Delimiter character
AA Address of module (00 to FF)
5 Command for reading target values
Response: Valid Command:
!AA(TL)(TH)[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax or communication error may get no response.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of responding module (00 to FF)
TL Target low values in engineering units format.
TH Target high values in engineering units format.
Example:
Command: $015 Receive: !01
−
10.000+10.000
Read Address 01 target value, return from
−
10 to +10.
Related Command:
Sec. 2.30, $AA3; Sec. 2.32, $AA6(SL)(SH); Sec. 2.33,
$AA7(TL)(TH)
Related Topic:
Sec. 3.8, Linear Mapping