Measurement Computing CB-COM-7012 - Manual (Page 44)

44
CB-7012, CB-7014, CB-7017 User’s Manual
2.21 @AAEAT
Description: Enable Alarm
Note: This command is for CB-7012/12D/12F/12FD/14D only.
Syntax: @AAEAT[CHK](cr)
@ Delimiter character
AA Address of receiving module (00 to FF)
EA Command to enable alarm.
T Alarm type, M=momentary alarm, L=latch alarm.
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax or communication error may get no response.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of responding module (00 to FF)
Example:
Command: @01EAM Receive: !01
Set Address 01 momentary alarm; return successful.
Related Command:
Sec. 2.19, @AADI; Sec. 2.24, @AADA; Sec. 2.25 @AACA
Related Topic:
Sec. 3.6, High/Low Alarm