Measurement Computing CB-COM-7012 - Manual (Page 33)

33
CB-7012, CB-7014, CB-7017 User’s Manual
2.10 $AA6
Description: Read Channel Status
Note: The command is for CB-7017/17F only.
Syntax: $AA6[CHK](cr)
$ Delimiter character
AA Address of module (00 to FF)
6 Command for read channel status
Response: Valid Command: !AAVV[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax or communication error may get no response.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of responding module (00 to FF)
VV channel enable/disable; 00 is all-disabled and FF is all-
enabled.
Example:
Command: $015A5 Receive: !01
Set Address 01 to enable channel 0,2,5,7 and disable channel
1,3,4,6. Return successful.
Command: $016 Receive: !01A5
Read Address 01 channel status. Return channel 0,2,5,7 are
enabled and channel 1,3,4,6 are disabled.
Related Command:
Sec. 2.9 $AA5VV