3 atm_msg_end_stream, 4 atm_msg_r_stream_stats, Atm_msg_end_stream – Dialogic DSI SS7MD User Manual

Page 82: Remove atm cell stream configuration, Atm_msg_r_stream_stats, Per atm cell stream statistics

6 Message Reference

Note: Attempting to activate TDM timeslots that are not present on the underlying TDM (e.g., using a

bitmap of 0xfffefffe when the TDM is configured as T1) may NOT result in the rejection of the
configuration message.

•

mgmt_id
ID of management module for status updates.

•

upper_stream_id
Upper layer (layer 3) stream identifier – this is a logical identifier from the upper layer for the cell stream
and is not board specific.

6.5.3

ATM_MSG_END_STREAM – Remove ATM Cell Stream Configuration

Synopsis

Message used to remove an active ATM cell stream.

Format

Description

Sent by the user to stop processing on a previously configured ATM cell stream.

Once successfully processed, the link may be reconfigured. The confirmation message (if requested)
indicates success with a status value of 0.

6.5.4

ATM_MSG_R_STREAM_STATS – Per ATM Cell Stream Statistics

Synopsis

Message used to retrieved (and reset) per cell stream statistics.

Format

MESSAGE HEADER

FIELD NAME

MEANING

type ATM_MSG_END_STREAM

Cell Stream ID

src Sending

module

dst ATM_module_ID

rsp_req

Used to request a confirmation.

hclass 0

status

SDE Message status code

err_info 0

len 0