1 atm_config, Atm_config, Command. the links to be used are then – Dialogic DSI SS7MD User Manual

Page 137: Configure the atm module

Text mode
Original mode

137

Dialogic

DSI SS7MD Programmer’s Manual Issue 3

7.4.1

ATM_CONFIG – Configure the ATM Module

Synopsis

Global configuration of the ATM Module.

Syntax

ATM_CONFIG

Example

ATM_CONFIG 0x0000 4

Parameters

The ATM_CONFIG command includes the following parameters:

•

A 16-bit value containing additional run-time options. The bit significance is as follows:

— Bit 0 - Use ATM Forum Idle cell format rather than ITU.

•

The maximum number of cell streams this module will be asked to simultaneously support. For an IMA
bundle, each TDM stream within the bundle will be counted as separate.