Dialogic DSI SS7MD - Manual (Page 80)

80
6 Message Reference
6.5.2 ATM_MSG_CFG_STREAM – ATM Cell Stream Configuration
Synopsis
Message used to configure an ATM cell stream.
Format
Description
Processed by the module (once a module configuration message has been correctly processed) to configure
and activate an ATM cell stream (whether single TDM or IMA bundle).
After extraction of the message parameters (and in combination with the per module configuration options
described above), the module shall configure an ATM cell stream (as requested) and will activate the ATM cell
stream.
For the configuration of IMA bundles, TDM resources cannot be dynamically added or removed from an active
IMA bundle. To increase the bandwidth available via an IMA bundle, the bundle will have to be removed and
re-added.
The confirmation message (if requested) indicates success with a status value of 0.
•
Cell Stream ID
The logical Cell Stream ID from the ATM module's perspective
Parameters
The ATM_MSG_CFG_STREAM message includes the following parameters:
MESSAGE HEADER
FIELD NAME MEANING
type ATM_MSG_CFG_STREAM (0x7261)
id Cell Stream ID
src Management module ID
dst ATM_module_ID
rsp_req Used to request a confirmation.
hclass 0
status SDE Message status code
err_info 0
len 22
PARAMETER AREA
OFFSET SIZE NAME
0 2 options
2 2 ima frame length
4 2 max frame length
6 2 default vpi
8 2 default vci
10 2 tdm stream
12 4 tdm timeslots
16 1 mgmt_id
17 2 upper_stream_id
19 3 Reserved. Set to 0.