1 capacity, 2 host interface, Dialogic – Dialogic DSI SS7MD User Manual
Page 11: Capacity, Host interface
11
Dialogic
®
DSI SS7MD Programmer’s Manual Issue 3
2.2
Dialogic
®
DSI SS7MDL4 Network Interface Board - Low Profile PCI Express Form
Factor
The DSI SS7MDL4 board is a x1 lane electrical, x4 lane physical, low profile PCI Express form factor, which
can be installed in x4, x8, or x16 lane slots. The board is supplied with two End Brackets suitable for low
profile and full height installation. Features of the DSI SS7MDL4 board are described in the following topics:
•
•
•
•
•
•
•
•
Safety, EMC and Telecommunications Specifications
•
2.2.1
Capacity
The capacity of the DSI SS7MDL4 board is described as follows:
•
Digital interfaces
— Four T1/E1 or J1 (software selectable)
— High impedance software selectable
•
SS7 links
Terminate or monitor up to
Note: In order to monitor both directions of a signaling link, the user must separately connect each
direction of the signaling link to the receive connection of two different LIUs on the DSI SS7MDL4
board.
•
Dialogic
®
DSI Protocol Stacks
MTP2 on board; other
protocols are host-based
2.2.2
Host Interface
The DSI SS7MDL4 board has a x1 electrical, x4 physical PCI Express connector. It can be installed in x4, x8,
or x16 PCI Express slots.
Note: The DSI SS7MDL4 board is a high performance densely packed low profile PCIe board supporting
high message rates. In achieving this performance, the board may dissipate up to 17W and this
must be taken into consideration when selecting both the host chassis and the PCI Express slot in
Table 1. SS7 Link Termination or Monitoring Capacity of the Dialogic® DSI SS7MDL4 Network
Interface Board
Link type
Max. number of links per board
Q.703 LSL (64kbit/s)
124
Q.703 LSL (56kbit/s)
123
Q.703 LSL (48kbit/s)
123
Q.703 Annex A HSL Framed
4
Q.2140/Q.2110 Q.SAAL links
(terminated)
128
AAL5 (including Q.SAAL) links
(monitored)
128
ATM cell streams
4