Dialogic DSI SS7MD - Manual (Page 148)

148
7 Configuration Command Reference
7.7.3 SCCP_CONC_SSR – SCCP Concerned Sub-System Resource
Synopsis
The SCCP_CONC_SSR command marks the specified sub-system (which was declared by SCCP_SSR) as
requiring notification of changes in the accessibility of another sub-system. Notification is given in the form
of an SCCP management indication.
Syntax
SCCP_CONC_SSR
Example
SCCP_CONC_SSR 1 2 3
Parameters
The SCCP_CONC_SSR command includes the following parameters:
•
A unique ID.
•
The ID of the subsystem that will receive the notifications.
•
The ID of the sub-system for which state changes will be issued.
7.7.4 SCCP_TRACE – SCCP Trace
Synopsis
The SCCP_TRACE command is used to configure SCCP to send trace messages to the trace module whenever
a specific message type is sent or received. See the SCCP Programmer’s Manual for details.
Syntax
SCCP_TRACE
Example
SCCP_TRACE 0x1 0x1 0x1
Parameters
The SCCP_TRACE command includes the following parameters:
•
Output event trace mask.
•
Input event trace mask.
•
Non-primitive trace mask.