Dialogic DSI SS7MD User Manual
Page 139
139
Dialogic
®
DSI SS7MD Programmer’s Manual Issue 3
•
A default AAL5 link will be configured for the cell stream to signal incoming active connections. This is the
VCI that will be used for this connection. Values 0, 3, and 4 are reserved and should not be used.
Note: The default VPI/VCI combination configured here must not be specified for any AAL5 link on this
cell stream.
•
Bitmap of active timeslots within the above TDM streams. Typically the timeslot bitmap for E1 will be
0xfffefffe and for T1/J1 will be 0x01fffffe.
See also other documents in the category Dialogic Hardware:
- Brooktrout 931-107-05 (2 pages)
- DM3 Media Boards DMV160LPEU (2 pages)
- DM/V1200A-4E1-PCI (2 pages)
- 3000 (32 pages)
- Integrated Media Gateways IMG 1010 (6 pages)
- DIALOG/4 (2 pages)
- DM3 Media Boards DMV600BTEP (2 pages)
- DM/V1200-4E1-PCI (2 pages)
- D/21H (2 pages)
- DISI32-EW (2 pages)
- D/21D (2 pages)
- Media Board VFX/41JCT-LS (2 pages)
- IP Board IPT10000C (2 pages)
- DM/F300-1E1-PCIU (2 pages)
- DM/V480A-2T1-PCI (2 pages)
- Media Board DMV1200BTEP (2 pages)
- TX4000 PCI SS7 (48 pages)
- DM3 Media Boards DM/V2400A-PCI (2 pages)
- Station Interface Box SI/240 (2 pages)
- Network Interface Board DNI2410TEPEHMPQ (2 pages)
- PBX Integration Board D/82JCT-U (2 pages)
- INTEGRATED MEDIA GATEWAYS 1010 (73 pages)
- Brooktrout 931-103-05 (2 pages)
- DM3 Fax Boards DM/F240-1T1-PCI (2 pages)
- DSI SPCI Network Interface Boards (111 pages)
- DM/N1200-4E1-cPCI (2 pages)
- Switching Board DI0408LSAR2 (2 pages)
- Mitel SX-2000 (70 pages)
- Media Board DM/V1200BTEPEQ (2 pages)
- Brooktrout TR1034 BRI (2 pages)
- M7324 (178 pages)
- DM/IP601-CPCI-100BT (2 pages)
- IMG 1004 (169 pages)
- Media Board D/120JCT-LS-EW (2 pages)
- Digital Network Interface Board DN/I601TEPHMP (2 pages)
- DM/IP481-2T1-PCI-100BT (2 pages)
- Media Board DM/V600BTEPEQ (2 pages)