Ivoclar Vivadent IPS e.max Press Abutment Solutions v.2 - Manual (Page 5)

5
Composition­
IPS e.max Press ingots and accessories required in conjunction with
IPS e.max Press Abutment Solutions consist of the following main
components:
–­ IPS­e.max­Press­ingots
Components: SiO
2
Additional components: Li
2
O, K
2
O, MgO, ZnO, Al
2
O
3
, P
2
O
5
and
other oxides
–­ IPS­Alox­Plunger
Components: Al
2
O
3
–­ IPS­Alox­Plunger­Separator
Components: Boron nitride
–­ IPS­e.max­Press­Invex­Liquid
Components: Hydrofluoric acid and sulphuric acid in water
–­ IPS­PressVEST­Powder
Components: SiO
2
, MgO and NH
4
H
2
PO
4
–­ IPS­PressVEST­Liquid
Components: Colloidal silicic acid in water
–­ IPS­PressVEST­Speed­Powder
Components: SiO
2
, MgO and NH
4
H
2
PO
4
–­ IPS­PressVEST­Speed­Liquid
Components: Colloidal silicic acid in water
–­ IPS­Object­Fix­Flow
Components: Oxides, water, thickening agent
–­ IPS­Ceramic­Etching­Gel
Components: Hydrofluoric acid (approx. 5%)
–­ Virtual­Extra­Light­Body­Fast­Set­
Components: Addition-reaction silicone, vinyl polysiloxane,
methylhydrogensiloxane, organoplatinic complex, silica
–­ Monobond­Plus
Components: Alcohol solution of silane methacrylate, phosphoric
acid methacrylate and sulphide methacrylate
–­ Multilink­Implant­­
Components: Dimethacrylate, HEMA, barium glass, ytterbium tri-
fluoride, spheroid mixed oxide
Warning
– Do not inhale ceramic dust during finishing – use exhaust air
discharge and mouth protection.
– IPS Ceramic Etching Gel contains hydrofluoric acid. Contact with
skin, eyes and clothing must be prevented at all costs, since the
material is extremely toxic and corrosive. The etching gel is intended
for professional use only and must not be applied intraorally
(inside the mouth).