Ivoclar Vivadent IPS e.max Press Abutment Solutions v.2 - Manual (Page 19)

19
Press­parameters­for­IPS­e.max­Press­
Place the hot and loaded investment ring in the centre of the hot press furnace using
the IPS Investment Ring Tongs.
Press START to start the selected program. Once the press program is completed, place the hot investment ring on the cooling
grid using the Investment Ring Tongs and allow it to cool to room temperature.
Then, place the side of the IPS Alox Plunger which has been coated with Separator
into the hot investment ring.
The­press­parameters­for­older-generation­Ivoclar­Vivadent­press­furnaces­­
are­listed­on­page­53­under­Press­Parameters.
Select­the­press­program­in­accordance­with­the­selected­ingot­to­be­pressed­
and­the­investment­ring­size­used.
Programat­EP­3000
Select­the­press­program­in­accordance­with­the­selected­ingot­to­be­pressed­
and­the­investment­ring­size­used.
Programat­EP­5000
The­press­parameters­for­HO,­MO,­LT­and­HT­are­integrated­­
starting­with­software­V­6.1.
The­press­parameters­for­HO,­MO,­LT­and­HT­are­integrated­starting­­
with­software­V­6.1.
Application
procedure
­–
­Fabrication
­Hybrid
­Abutment
­and
­Hybrid
­Abutment
­Cr
own