Ivoclar Vivadent IPS e.max Press Abutment Solutions v.2 - Manual (Page 26)

26
Apply IPS e.max Ceram Shade Incisal to imitate the incisal area.
Individual characterization of the emergence profile with IPS e.max Ceram Essences.
Enhance the chroma of the buccal surface.
Conduct the Stain and Characterization firing on a honey-comb firing tray.
Firing­parameters­for­the­Stain­and­Characterization­firing
IPS­e.max­Ceram­on­IPS­e.max­Press
Abutment Solutions
B
°C
S
min
t
°C/min
T
°C
H
min
V
1 ­
°C
V
2 ­
°C
L
°C
Stain and Characterization firing 403 6:00 60 770 01:00 450 769 500
Additional­Stain­and­Characterization­firing­cycles­can­be­conducted­with­the­same­firing­parameters.
Note:­
If­the­layer­thickness­is­less­than­2­mm­on­the­entire­pressed­object,­long-term­cooling­(L)­is­not­required­to­
produce­a­tension-free­condition.