Ivoclar Vivadent IPS e.max Press Abutment Solutions v.2 - Manual (Page 33)

33
Application
procedure
–
Optional:
Clinical
try-in
Apply Virtual Extra Light Body Fast Set both to the Ti base ...
Insert the Ti base into the pressed object. In doing so, observe the relative position of
the two components (rotation lock/marking). Hold the components in place for
approx. 2:30 minutes until the Virtual Extra Light Body Fast Set material has set.
Remove excess Virtual Extra Light Body Fast Set material from the screw channel with
an instrument.
... and directly into the pressed object (abutment/abutment crown).
Carefully remove protruding excess material with a suitable instrument, e.g. a scalpel.