Ivoclar Vivadent IPS e.max Press Abutment Solutions v.2 - Manual (Page 2)

2
Table of Contents
3 Product­Information
Material
Uses
Composition
6 Fabrication­of­Hybrid­Abutments­and­Hybrid­Abutment­Crowns­
Treatment/fabrication process
Shade – tooth shade, preparation shade/abutment shade
Model preparation
Selecting a Ti base
Layer thicknesses of the ceramic components
Modeling
Sprueing
Investing
Preheating
Pressing
Divesting
Removing the reaction layer
Finishing
Stain and Characterization firing
Glaze firing
Crown on hybrid abutment
32 Optional:­Clinical­Try-in­ ­­­­­
Temporarily securing the pressed object on the Ti base
Clinical try-in
37 Permanent­Cementation­ ­­­­­
Pre-treatment of the Ti base
Preparing the pressed object
Cementation with Multilink Implant
43 Seating­and­Aftercare ­­­­­
Sterilization
Intraoral preparation
Seating the hybrid abutment and crown
Seating the hybrid abutment crown
Care notes – Implant Care
50 General­Information
­ Frequently Asked Questions
Material Selection Table
Press and Firing Parameters
Clinical Cases
application
procedure