beautypg.com

Harken 7413.10 MKIV Jib Reefing & Furling built after Feb. 2009 User Manual

Page 26

background image

Slide halyard swivel above feeder. Place

feeder in foil recess. Push screw down

so tab catches under foil. Tighten screw.

Note: Screw will turn with some difficulty.

It is plastic-coated to prevent loosening

due to vibration.

IMPORTANT! When removing screw,
loosen no more than one full turn.
Slide screw up and remove feeder.

Assembly Feeder/Final

26

MKIV units 3, 4

Check foil height at top; set and secure

using hex key.

This manual is related to the following products: