beautypg.com

Rod rigging – Harken 7413.10 MKIV Jib Reefing & Furling built after Feb. 2009 User Manual

Page 22

background image

ROD RIGGING

Insert two cotter pins and spread.

Clean excess Loctite from terminal

body using special care to ensure

that there is no red Loctite on

threaded stud.

Assembly

Rod Adapter Stud

22

MKIV units 3, 4

Apply a few drops of

red Loctite

®

adhesive

to threads of nosepiece.

Screw main threaded stud portion

onto bronze nosepiece until flats

align with two cotter pin holes in

terminal body.

Tip: Turn nosepiece completely into
threaded stud portion. Flats will be
close and may only require a small
half turn to align with cotter pin
holes.

Loctite is a registered trademark of Henkel
AG & Company KGaA.

This manual is related to the following products: