beautypg.com

Assembly top foil – Harken 7413.10 MKIV Jib Reefing & Furling built after Feb. 2009 User Manual

Page 16

background image

Assembly

Top Foil

Place halves of plastic bushings on stay so

hooked part of longer section faces out.

Tip: With foil screw holes up as shown
below, place longer half of bushing
with hook on upper half.

Install trim cap. Place each side over wire.

Push trim cap into foil to start; tap

in using hammer.

Install trim cap screws.

16

MKIV units 3, 4

Red Loctite

®

adhesive.

Halyard deflector.

Unit 3 only.

Loctite is a registered trademark of Henkel

AG & Company KGaA.

This manual is related to the following products: