beautypg.com

Assembly bottom foil/connectors/halyard swivel – Harken 7413.10 MKIV Jib Reefing & Furling built after Feb. 2009 User Manual

Page 20

background image

Continue installing connectors and wedges. Make

sure to use adhesive in screw holes.

Continue assembly. Use 356 mm (14")

bottom connector to assemble bottom foil.

Slide halyard swivel onto foil above feeder window.

Make sure taller “half” is up as shown.

20

MKIV units 3, 4

Assembly

Bottom Foil/Connectors/Halyard Swivel

Red Loctite

®

adhesive.

Loctite is a registered trademark of Henkel AG &
Company KGaA.

This manual is related to the following products: