Greenheck Vari-Flow Air Management System(476251) - Manual (Page 28)

28 Vari-Flow Air Management System
Configuration
Balancing allows the user to easily balance the exhaust
and supply fans.
Mode of Operation:
Normal Operation: Fans operate based off of the fan
on/off buttons and temperature interlock.
Balancing Minimum: Forces the fan on and at the
speed shown in minimum speed.
Minimum Speed: Adjust the minimum fan speed as
necessary for the design of the system.
Balancing Maximum: Forces the fans on and at the
speed shown in the maximum speed.
Maximum Speed: Adjust the maximum fan speed as
necessary for the design of the system.
NOTE
Make sure to return the mode of operation to “normal
operation” when balancing is complete. If the mode of
operation is left in either balancing mode the fan will
not turn off.
EXHAUST FAN
BALANCING
HOME
EXHAUST FAN 1 BALANCING
FAN NAME: HOOD 1
BALANCING MODE FORCES THE FAN TO MINIMUM SPEED
OR MAXIMUM SPEED BASED ON THE SELECTION.
WHEN BALANCING IS COMPLETED, TURN BACK TO
NORMAL OPERATION.
MODE OF OPERATION NORMAL OPERATION
MINIMUM SPEED 50
MAXIMUM SPEED 100
EXHAUST FAN
BALANCING
HOME
EXHAUST FAN 1 BALANCING
FAN NAME: HOOD 1
BALANCING MODE FORCES THE FAN TO MINIMUM SPEED
OR MAXIMUM SPEED BASED ON THE SELECTION.
WHEN BALANCING IS COMPLETED, TURN BACK TO
NORMAL OPERATION.
MODE OF OPERATION NORMAL OPERATION
MINIMUM SPEED 50
MAXIMUM SPEED 100
Scheduling allows the user to set an on and off time for
each exhaust fan.
SCHEDULING
Schedule Occurence Time Enable
Fan 1 On Schedule Daily 06:00 AM
Fan 1 Off Schedule Daily 09:00 PM
Fan 2 On Schedule Daily 06:00 AM
Fan 2 Off Schedule Daily 09:00 PM
Fan 3 On Schedule Daily 06:00 AM
Fan 3 Off Schedule Daily 09:00 PM
Fan 4 On Schedule Daily 06:00 AM
Fan 4 Off Schedule Daily 09:00 PM
Fan 5 On Schedule Daily 06:00 AM
Fan 5 Off Schedule Daily 09:00 PM
SCHEDULING
Schedule Occurence Time Enable
Fan 1 On Schedule Daily 06:00 AM
Fan 1 Off Schedule ff Daily 09:00 PM
Fan 2 On Schedule Daily 06:00 AM
Fan 2 Off Schedule ff Daily 09:00 PM
Fan 3 On Schedule Daily 06:00 AM
Fan 3 Off Schedule ff Daily 09:00 PM
Fan 4 On Schedule Daily 06:00 AM
Fan 4 Off Schedule ff Daily 09:00 PM
Fan 5 On Schedule Daily 06:00 AM
Fan 5 Off Schedule ff Daily 09:00 PM
BMS displays the appropriate BMS information.
Occurrence, Time and Enabling can be adjusted.
Schedules for each exhaust fan are listed. User can
adjust the occurrence, time on and time off. In order for
the scheduling to be used, the Enable checkbox must
be selected.
IF THERE IS NO INFORMATION HERE, THERE IS NO BMS PROTOCOL.
SEE IOM FOR MORE DETAILS.
BMS CONFIGURATION
IF THERE IS NO INFORMATION HERE, THERE IS NO BMS PROTOCOL.
SEE IOM FOR MORE DETAILS.
BMS CONFIGURATION
®