beautypg.com

Touch screen navigation – Greenheck Vari-Flow Air Management System(476251) User Manual

Page 25

background image

25

Vari-Flow Air Management System

Touch Screen Navigation

INDIVIDUAL

LIGHT ON/OFF

ALL LIGHTS

INDIVIDUAL
FAN ON/OFF

ALL FANS

ON/OFF

AUTO

TEMPERING

100%

OVERRIDE

CLEAN

HOOD

TEMP INTERLOCK

INDICATOR

100

75

50

25

0

1
EXHAUST FAN

2

3

4

100

75

50

25

0

SUPPLY FAN

1

2

10:11:57

INDIVIDUAL

LIGHT ON/OFF

ALL LIGHTS

ALL LIGHTS

INDIVIDUAL
FAN ON/OFF

ALL FANS

ALL FANS

ON/OFF

AUTO

TEMPERING

100%

100%

OVERRIDE

CLEAN

CLEAN

HOOD

TEMP INTERLOCK

TEMP INTERLOCK

INDICATOR

100

75

50

25

0

1
EXHAUST FAN

2

3

4

100

75

50

25

0

SUPPLY FAN

1

2

10:11:57

ALL LIGHTS ON/OFF - turns all lights on/
off.

INDIVIDUAL LIGHT ON/OFF - directs you
to the individual light control screen where
you can turn individual lights on or off.

ALL FANS ON/OFF - turns all fans on/off.

INDIVIDUAL FAN ON/OFF - provides
control of each individual fan allowing you
to turn individual fans on/off.

100% OVERRIDE - forces the fans that
are currently on to full speed. The fans will
return to the speed determined by the hood
temperature after the timer has expired
(preset to 10 minutes). Pressing the icon

when 100% OVERRIDE is on will also return the fans to
the speed determined by the hood temperature.

TEMP INTERLOCK INDICATOR – if the
fan(s) were not turned on via the fan on/off
button(s) and the temperature in the hood
is above the temperature interlock setpoint
the TEMP INTERLOCK INDICATOR icon

will be lit up. The fan(s) will continue to run until it
is below the setpoint for the amount of time in the
temperature interlock settings.

AUTO TEMPERING (if equipped)
enables/disables the make up air unit to
automatically heat and/or cool based on
the inlet air temperature. When it is enabled
the make-up air until will heat and/or cool

as determined by the inlet air sensors (part of the make-
up air unit). When it is disabled the make-up air unit’s
heat and/or cool functions are disabled.

CLEAN HOOD (if equipped) – forces the
Waterwash Control Panel (WWCP) or
Grease Grabber H

2

O to wash. This will

force the fans off during the wash cycle.

HELP – this will display a help menu for
this particular page.

NAVIGATION BAR (arrow at bottom of the
screen)
– pulls up the hidden NAVIGATION

menu allowing access to ALARMS, HOME, SETTINGS.

ALL LIGHTS

ALL LIGHTS

ALL LIGHTS

INDIVIDUAL

LIGHT ON/OFF

INDIVIDUAL

LIGHT ON/OFF

INDIVIDUAL
FAN ON/OFF

INDIVIDUAL
FAN ON/OFF

ALL FANS

ON/OFF

ALL FANS

ALL FANS

ON/OFF

100%

OVERRIDE

100%

100%

OVERRIDE

CLEAN

HOOD

CLEAN

CLEAN

HOOD

AUTO

TEMPERING

AUTO

TEMPERING

TEMP INTERLOCK

INDICATOR

TEMP INTERLOCK

TEMP INTERLOCK

INDICATOR

®