Grandstream GVR3550 User Manual - Manual (Page 91)

Grandstream Networks, Inc. GVR3550 User Manual Page 91 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
Table 32: GVR3550 Network Diagnose Parameter Explanation:
Parameter Explanation
Network Test (Ping) Input the destination address, click on "Start" to initiate test,
click "Stop" to end test.
Diagnose Output Display the diagnostic result of GVR3550and destination IP address.
Path of file saving Display the external device, users could choose one if there are multiple choices
Refresh Click to refresh the new access external device.
Start Click to initiate capture. The capture file will be saved in the directory of selected
external device.
HDD DETECTION
The GVR3550 provides S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) Detection and
Bad Sector Detection. Users could check HDD running status via HDD detection.
S.M.A.R.T detection provides a variety of detections on HDD heads, temperature, material of disk surface,
internal circuit, monitoring and forecasting the underlying problems of HDD that may occur in time.
S.M.A.R.T detection page is as shown in Figure 76 below.
Figure 76: GVR3550 S.M.A.R.T. Detection Page