Grandstream GVR3550 User Manual - Manual (Page 51)

Grandstream Networks, Inc. GVR3550 User Manual Page 51 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
Figure 34: GVR3550 Manual Add Camera Page
Table 16: GVR3550 Camera Parameter Setting Explanation:
Parameter Explanation
Camera Set the camera No., existing camera number cannot be changed.
Protocol Supports the Grandstream series cameras and cameras compatible with ONVIF
protocol
Protocol (IP) Set the protocol to TCP or UDP
IP Address Set the IP address of the remote IP Camera
Port Set the port number of the remote IP Camera
Username Set the username to connect the remote IPC. The default is "admin"
Password Set the password to connect the remote IPC. The default is "admin"
NOTE:
 When trying to connect to the remote IPC, the username and password the GVR use are both
"admin" or null by default. If the username and password are not default ones, the connection may
fail. Please manual modify the remote IPC username and password.