Configuring http server, Configuring, Http – Grandstream GVR3550 User Manual User Manual
Page 112: Server
Grandstream Networks, Inc.
GVR3550 User Manual
Page 112 of 120
Firmware Version 1.0.0.65
Last Updated: 10/2014
CONFIGURING HTTP SERVER
In this chapter, we take using Apache HTTP Server2.2 server in windows XP to introduce the procedures
of configuring HTTP server.
Users could obtain the Apache HTTP server installation software via
please finish
the default installation according to the wizard.
1. Enable Apache server. Go to Start ->All Programs ->Apache HTTP Server 2.2 -> Monitor Apache
Servers in a PC which has installed with the Apache server. The icon
in the notification area
of taskbar indicates Apache server is already enabled. If displays
, select
"
Start
"
to enable the
server;
2.
Put the prepared file to the following path:
Installation Path \ Apache Software Foundation \ Apache2.2 \ htdocs.
NOTE:
If put the prepared file under the folder "htdocs", the URL format to access the Apache server is:
http:// The IP address of the PC that installed with the Apache server .
If put the prepared file under the subfolder of the folder "htdocs", the URL format to access the Apache
server is: http:// The IP address of the PC that installed with the Apache server/subfolder Name. e.g.: