Grandstream GVR3550 User Manual - Manual (Page 65)

Grandstream Networks, Inc. GVR3550 User Manual Page 65 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
ABNORMAL ALARM CONFIG
Abnormal Alarm Config includes Disconnection Alarm, HDD Empty Alarm, HDD Full Alarm, HDD Error
Alarm and IP Conflict Alarm. See Figure 48 below. Users can set the alarm actions after selecting the
corresponding alarms.
Figure 48: GVR3550 Abnormal Alarm Config Page
Table 21: GVR3550 Abnormal Alarm Parameter Explanation:
Parameter Explanation
Disconnection Alarm Alarm when detecting no cable access
HDD Empty Alarm Alarm when detectng without HDD access
HDD Full Alarm Alarm when HDD is fuill
HDD Error Alarm Alarm when detecting HDD error
IP Conflict Alarm Alarm when the IP address is conflict with the GVR address
Users could set various alarm actions like Screen Prompt, Beeper, HDMI Alarm, Send Email, or Copy
Alarm to Other Camera. The Parameters settings are the same in chapter Camera Event Settings.