Encoding config, Encoding, Config – Grandstream GVR3550 User Manual User Manual
Page 55: Igure, Gvr3550, Ncoding, Onfig, Able, Onfig parameter, Xplanation
Grandstream Networks, Inc.
GVR3550 User Manual
Page 55 of 120
Firmware Version 1.0.0.65
Last Updated: 10/2014
ENCODING CONFIG
Encoding Config page is as shown in Figure 38 below, users could configure camera's name and stream.
There are two streams. One is primary stream that is used for Play Black, another is secondary stream
which is used for Live View.
Figure 38: GVR3550 Encoding Config Page
Table 19: GVR3550 Encoding Config parameter Explanation:
Parameter
Explanation
Camera Selection
Select a
camera to configure codec configuration. It will display the camera’s IP and
model after selecting each camera.
Camera Name
Manual enter the camera
’s name.
Display Time
Select if display the IPC’s time on Live View window.
Display Camera Name Select
if display the IPC’s name on Live View window.