Grandstream GVR3550 User Manual - Manual (Page 38)

Grandstream Networks, Inc. GVR3550 User Manual Page 38 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
PRESET
When set PTZ to preset, users could add/delete/edit preset on the control panel below. The procedures are
shown in Figure 18.
Figure 18: GVR3550 PTZ Control Page – Preset
1. Adjust the remote camera position via the PTZ steering control.
2. Click on to add a new preset.
3. Enter the preset name in the input box or just use the default name.
4. Click the check button to save the preset, or click on on the right side of the preset to edit
the name.
5. Double click one preset with mouse (or press the OK button on the front panel, or press the ENTER
button on the remote control) to activate it.
6. Users could click below the preset control panel to delete the preset.