Grandstream GVR3550 User Manual - Manual (Page 54)

Grandstream Networks, Inc. GVR3550 User Manual Page 54 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
Table 17: GVR3550 Camera Events Settings parameters Explanation
Parameter Explanation
Camera Select the camera user would like to configure
Event Type Motion Detection, Camera Lens Occlusion, Signal Loss, IPC External Alarm,
Missing Object Detection, Foreign Object Detection.
Alarm Enable Tick to enable/unable alarm.
Alarm Schedule Select schedule in the drop-down list .
Region Config Set detection area to IPC with Motion Detection, Missing Object Detection and
Foreign Object Detection function. Users could set up to 16 detection areas.
Move the mouse to add areas and click on X in the upper right corner of the area
to delete it. Double click or right click the mouse to save the area and exit.
PTZ Linkage Config Only available to IPC with PTZ linkage function. For different IPC and camera
alarm event, users could set various alarm action: Screen Prompt, Beep, HDMI
Alarm, Send Mail, Alarm Output, Alarm Delay(s).Or copy the alarm action to
other cameras.
Alarm Action Set different alarm mode.
Table 18: GVR3550 Camera Alarm Parameter Explanation:
Parameter Explanation
Screen Remind Click to send alarm to display screen
Beeping Click to beeping when alarm triggered
HDMI Alarm Click to send alarm to GVR3550 connected HDMI display device
Email Notification Click to send email to configured email. Email Configuration:
Main Menu  Settings  System Settings  Email Settings
IP Camera Click to select related alarm IP Cameras
Record Delay (Second） Configure the time for alarm recording
Alarm Output Click to select Alarm Output
Alarm Delay (Second) Configure Alarm Delay Timer (in Second)
Copy to other IPC Click to copy the alarm configuration to other IP cameras.