Record mode config, Record, Mode – Grandstream GVR3550 User Manual User Manual
Page 52: Config, Igure, Gvr3550, Ecord, Onfig
Grandstream Networks, Inc.
GVR3550 User Manual
Page 52 of 120
Firmware Version 1.0.0.65
Last Updated: 10/2014
RECORD MODE CONFIG
Record Mode Configuration page is as shown in Figure 35 below, users could click one camera to set
Close Record, All Day Record and Schedule Record.
Figure 35: GVR3550 Record Mode Config Page
All day record Status:
Enable all cameras to record.
Auto Record Status:
Enable record via the camera.
Close Record Status:
Disable record via the current camera.
When set to "Schedule", users should select schedule in the drop-down list .Tap on
to add new schedule;
Or
tap on "Close for All" or "All Day for All" to set cameras.