Grandstream GVR3550 User Manual - Manual (Page 104)

Grandstream Networks, Inc. GVR3550 User Manual Page 104 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
Table 37: GVR3550 Remote Preview Operation Explanation:
# Icon Name Explanation
1 Closed Record The camera is not recording now
Manual
Record The camera is in manual record mode.
The default path: C:\GVR_Record
2 Capture The external storage devices (USB) need to be connected first.
Users could configure the save path and set it to default
C:\GVR_Capture。
3 Mute/Unmute Unmute to listen audio from remote IP Camera if the IP Camera has
microphone connected.
Mute to stop the auidio.
4 Start/Stop
Intercom Start to allow audio input from PC to play out at remote IP camera if
remote IP camera has audio output device connected (e.g.: Speaker).
Stop to disable this process.
5 PTZ Control Enable basic PTZ operations preset PTZ preset, patrol, pattern
6 Switch to Full
Screen Switch the current screen to full screen or double click to enter full
screen mode
7 Instant
Playback Playback the record in the preset time. It will prompt "The selected
camera has no record "if has no existing record. Users could set the
preset time in Basic System Settings chapter
8 Image Config Open configure interface to adjust current image
9 Close Preview Close the preview window