Grandstream GVR3550 User Manual - Manual (Page 42)

Grandstream Networks, Inc. GVR3550 User Manual Page 42 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
6 Nine Screen Switch to 9 screen: IMG One-to-Nine, IMG Ten-to-Eighteen, IMG
Nineteen-to-Twenty-four
7 Sixteen Screen Switch to 16 screen: IMG One-to-Sixteen, IMG Seventeen-to-
Twenty-four
8 Optimize System Automatically adjust the camera connection protocol and secondary
stream resolution, bit rate, frame rate and related parameters.
Reboot after the completion
9 Start/Stop All Day
Record
Start All Manual Record. Once enabled, the menu item turns to "Stop
All Record". Click to stop all record including auto record
10 Start/Stop Patrol Enable Patrol. Once enabled, the menu item turns to ” Stop Patrol".
Click to stop patrol then stay on the current screen.
11 Camera Config Quick access the camera settings
12 Unload Unload the inserted USB device
NOTE:
 Please go to Menu->System Settings->Local View Control to set Patrol Intervals
before apply Start Patrol.
 Patrol would pause if users make any arbitrary operations in the process of patrol,
abort the operations to resume patrol.

SHORTCUT BUTTON
Click on the shortcut button in the lower left corner of the preview screen to bring up the shortcuts options
as shown in Figure 22. Users can enter the playback page or the main menu, login /logout or reboot the
unit.
Figure 22: GVR3550 View Page Shortcut Button Menu