Grandstream GVR3550 User Manual - Manual (Page 78)

Grandstream Networks, Inc. GVR3550 User Manual Page 78 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
Table 27: GVR3550 Edit Volume Property Parameter Explanation:
Parameter Explanation
Format Volume Users could format the existing volume, please consider carefully before apply.
Once formatted, the volume data will be all erased and could not be restored.
Erase All Data Users could erase all data of the existing volume, please consider carefully before
apply. Once formatted, the volume data will be all erased and could not be
restored other than the locked record
Configure Property Users could set the property of existing volume to Read-Write or Read-only. The
volume will not save record if set to Read-only.
Table 28: GVR3550 HDD RAID Parameter Explanation:
Parameter Explanation
New Disk Array Configure RAID
Delete Delete configured RAID.
Caution: All data will be erased and not be able to recover once RAID deleted.
RAID Class Select the RAID Class need to be configured
Table 29: GVR3550 HDD Management Parameter Explanation:
Parameter Explanation
Format RAID Format RAID configured.
Caution: Data will be erased and cannot be recovered once command issued.
Erase All Data Erase all data in RAID.
Caution: All data will be erased excepted locked recording.
Property Config Configure the Read/Write Property of RAID. Once configure Read Only, the RAID
will not be able to record new data.