Grandstream GVR3550 User Manual - Manual (Page 35)

Grandstream Networks, Inc. GVR3550 User Manual Page 35 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
6 Switch to Full
Screen Switch the current screen to full screen or double click to enter full
screen mode. Click or double click the screen to exit full screen.
7 Instant
Playback Playback the record in the preset time. It will prompt "The selected
camera has no record "if has no existing record. Users could set the
preset time in Basic System Settings chapter
8 Image Config Enter the corresponding setting page to adjust the current window
image.
9 Encode Config Open interface to configure encoding parameters of IP Camera
NOTE:

Start intercom will unmute the camera the same time. Close the intercom to mute the
camera.

When start intercom of one camera, if another camera has enabled intercom or unmute, turn
off it first then start intercom of the current camera.

If one camera has enabled intercom or unmute, unmute another camera will close
intercom/unmute the previous camera automatically.