Grandstream GVR3550 User Manual - Manual (Page 40)

Grandstream Networks, Inc. GVR3550 User Manual Page 40 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
PATTERN
When set PTZ to pattern, users could edit and use pattern on the control panel. The factory default setting
is 3 empty patterns. See Figure 20.
Figure 20: GVR3550 PTZ Control Page – Pattern
1. Set PTZ control to pattern
2. Select the pattern name.
3. Click the "Start Record" button to adjust the remote camera pattern via the PTZ steering control.
4. Click the "Save Record" button save the pattern.
5. Click on before the pattern, when the button turns to a triangle , the PTZ will cycle according to
the pattern. Click again to stop PTZ movement.