Grandstream GVR3550 User Manual - Manual (Page 34)

Grandstream Networks, Inc. GVR3550 User Manual Page 34 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
Table 10: GVR3550 System Abnormal Alarm Screen Explanation:
BASIC VIEW OPERATION
Users could put the cursor on one camera screen if needs to make basic operations to a particular camera.
Click to bring up the menu bar as shown in Figure 15. Click the buttons on the menu bar to make
corresponding operations.
Figure 15: GVR3550 Basic View Operation
Table 11: GVR3550 Basic View Operation Explanation:
# Icon Name Explanation
1 Close Record The camera is not recording now
Auto Record The camera is in schedule record mode
Manual
Record The camera is in manual record mode
2 Capture The external storage devices (USB) need to be connected first. Users
could configure the save path and set it to default
3 Mute/Unmute When the volume in on, if the remote camera is installed with audio
input device, users could listen in to the remote party
4 Start /Stop
Intercom When the intercom in on, if the remote camera is installed with audio
output device, users could speak to the remote camera via local audio
input device.
5 PTZ Control Click to enable PTZ control to configure PTZ preset, patrol and pattern
Icon Name Explanation
Disconnection
Alarm
Alarm when the network is disconnected.
HDD Empty
Alarm
Alarm when no HDD detected.
HDD Error Alarm Alarm when HDD is abnormal.
HDD Full Alarm Alarm when HDD is full.
IP Conflict Alarm
Alarm when detecting the IP address of another device is in conflict
with the GVR in the network.